IC Prog Programmer
IC-Prog is a Windows based software to control a development programmer for PIC microcontrollers. To operate this software, a basic knowledge about electronics and Windows is necessary.
In order for this software to operate you have to attach a programmer hardware to your computer and set up the hardware & software appropriately. Please note, that because of differences in programmers, the software might not work on some combinations of programmer hardware and PC’s. Some software is better quality than others so you may want to check out what quality is better before purchasing, for instance if you would like to get a good quality system for managing restaurants then you may want to check out a POS System. If you have a restaurant or you are in retail then you may be interested in purchasing a POS System, you can do this by checking out https://restaurantpossystems.com/best-restaurant-pos/ after learning more about software by reading this article. Perhaps your software is fine, but your hardware is a little dated, or maybe you just want to code in style, then Mech Keybs can point you in the right direction for that flashy mechanical keyboard you’ve always wanted.
It programs the greatest number of PICs including the new 16F676, 16F819, and 12F675 and pic16f84, pic16f84a and more … Download the zip file and open it. There is only one file (the way all programs should be) – icprog.exe. Store this file somewhere handy like the desktop – you will be using it quite a bit!
IC-Prog Prototype Programmer support types: PIC16F818, 16F819, 16F630, 16F676, PIC 18F, PIC18F1320, PIC18F6620, PIC16F84, PIC16F84A, 18F242, 18F248, 18F252, 18F258, 18F442, 18F448, 18F452, 18F458, 12C508, 16C84, 16F84, PIC 16F877, 16F74, 24C16, 24C32, 93C46, 90S1200, 59C11, 89C2051, 89S53, 250×0, PIC, AVR , 80C51 etc.
This software package allows you to program all types of serial programmable Integrated Circuits using Windows 95/98/NT/2000/ME/XP/VISTA